Schall-Ex® L-15/30 WS
athmer drop seal for installation in groove and perfect floor adaption
- the state of the art drop seal
- parallel drop, to minimise friction with the floor
- no inner rail offset and protective press plate for the frame
- suitable for smoke and fire protection
- very high sound insulation
- WS fixing: screw fixed either side
- werkzeuglose Einstellung
This seal offers a very high sound attenuation value and impresses with its robust, durable internal mechanism. Thanks to parallel release, it adapts perfectly to the floor and has a clip-on sliding release. It is installed without a pressure plate, can be adjusted without tools and is suitable for smoke and fire doors. It can be optionally extended with edge and shoot bolt pre-fitting.
| door type: | hinged door |
|---|---|
| door leaf: | single leaf, double leaf |
| aplication area: | interior door |
| usability: | accessibility, fire protection, smoke protection, sound insulation |
| door leaf material: | timber, metal |
| opening direction: | DIN L or R |
Technical data:
| concealed flush bolt hole: | suitable for diameter of 8 mm flush bolt |
|---|---|
| flush bolt: | yes |
| carrier material: | aluminium |
| surface: | mill finish |
| surface colour: | silver |
| actuator: | sliding acutator |
| actuation: | single |
| clipable actuator: | yes |
| joint sound insulation: | 52 dB |
| floor gap: | 7 mm |
| sealing profile material: | self-extinguishing silicone |
| sealing profile colour: | grey |
| parallel drop: | yes |
Dimensions:
| width: | 14.8 mm |
|---|---|
| height: | 30 mm |
| travel max.: | 20 mm |
| fixed lengths available: | yes |
| length min.: | 235 mm |
| length max.: | 2000 mm |
| cutback information: | min. delivery length cannot be cut back |
| standard lengths: | 1083 mm, 1208 mm, 708 mm, 833 mm, 958 mm |
| cutback std. lengths: | 125 mm |
Fixing:
| fixing: | WS - fixing brackets |
|---|---|
| press plate required: | no |
| installation: | in-groove |
| maintenance-free: | yes |
| accessories incl.: | 5382 |
| Technical drawings |
|---|
| Technical drawing 2D PDF |
| Technical drawing 2D DWG |
| Technical drawing 2D DXF |
| Technical drawing 3D PDF |
| Technical drawing 3D STP |
| Fitting instructions |
| Schall-Ex® L-15/30 WS |
| Catalogues |
Performance/ certification:
| abZ: | Z-6.100-2530 |
|---|---|
| accessible: | P1B050 DIN CERCTO |
| test cycles: | 1,000,000 cycles |
| EPD: | EPD-ATD-36.1 |
| corrosion note: | corrosion test according to DIN EN 1670 class 5 |
| corrosion test: | 120004365.19 |
| MPA Qualitylabel: | MPA NRW-00708-01 (Vers. 2) |
| MPA certificate: | 120009355.03 Rev. 02 |
| sound insulation certificates: | 15-004132-PR01 PB Z01-K06-04-de-03 |
| UL: | UL10C (R38166) Category H |