Schall-Ex® L-15/30 WS Pivot
The system is the four-sided sealing system for modern pivot-hinged doors.
- for single and double-leaf timber pivot doors
- sealing to the top and bottom
- suitable with single-acting pivot doors
- special roller actuator suitable for various frame designs
- for opening in both directions
- four-sided sealing system without visual drawbacks
- can be combined with many standard pivot door fittings
The floor seals with roller release allow the door to be opened in both directions. The magnetic seal systems only tighten when they are positioned on top of each other and the pivot door is at the zero point. Otherwise, the door leaf swings smoothly in both directions.
| door type: | hinged door, swing door |
|---|---|
| door leaf: | single leaf, double leaf |
| aplication area: | exterior door, interior door |
| usability: | accessibility, fire protection, smoke protection, sound insulation |
| door leaf material: | timber |
| opening direction: | DIN L or R |
Technical data:
| concealed flush bolt hole: | suitable for diameter of 8 mm flush bolt |
|---|---|
| flush bolt: | yes |
| carrier material: | aluminium |
| surface: | mill finish |
| surface colour: | silver |
| actuator: | roll actuator |
| actuation: | single |
| clipable actuator: | yes |
| sealing profile material: | self-extinguishing silicone |
| sealing profile colour: | grey |
| parallel drop: | yes |
Dimensions:
| width: | 14.8 mm |
|---|---|
| height: | 30 mm |
| Hinweis Hub: | mit Gegenrolle Rundumdicht Pivot L-15 Set: Hub 12 mm |
| travel max.: | 20 mm |
| fixed lengths available: | yes |
| length min.: | 235 mm |
| length max.: | 2000 mm |
| cutback information: | min. delivery length cannot be cut back |
| standard lengths: | 1083 mm, 1208 mm, 833 mm, 958 mm |
| cutback std. lengths: | 125 mm |
Fixing:
| fixing: | WS - fixing brackets |
|---|---|
| press plate required: | yes |
| installation: | in-groove |
| maintenance-free: | yes |
| accessories incl.: | 5516 |
| Technical drawings |
|---|
| Technical drawing 2D PDF |
| Technical drawing 2D DWG |
| Technical drawing 2D DXF |
| Technical drawing 3D PDF |
| Technical drawing 3D STP |
| Fitting instructions |
| Rundumdicht Pivot L-15 Set |
| Catalogues |
Performance/ certification:
| abZ: | Z-6.100-2530 |
|---|---|
| test cycles: | 1,000,000 cycles |
| EPD: | EPD-ATD-36.1 |
| MPA Qualitylabel: | MPA NRW-00708-01 (Vers. 2) |
| UL: | UL10C (R38166) Category J |