Four-sided sealing system
Effective sealing against sound, draughts, smoke and odors
athmer Rundumdicht sealing system
With athmer's sealing systems, you can completely seal your doors on four sides against sound, smoke, draughts and odors.
Effectively seal glass and wooden sliding doors in front of the wall.
Sliding door system Universal M-12
Sliding doors continue to be a strong trend in both the residential and commercial sectors. Doors made of timber and metal have been protected against drafts, sound, and smoke for years with the proven athmer VHH sealing system. There has not yet been an automatic system for sliding doors made of glass. They were considered unsealable simply because of their different fittings and wall clearances as well as their transparency.
With the Universal M-12 system, sliding doors made of timber, metal and glass up to a size of 2,000 x 3,000 mm running in front of the wall can be sealed on four sides without affecting the appearance. The sealing system is mounted on the door surface and wall in such a way that it is concealed by the wall and lintel when closed. Only the lower sealing level remains visible, but is concealed by a decorative aluminum screen. Thus, the system is also suitable for retrofitting.
Market requirements have increased significantly in recent years. Today, sliding glass doors should also keep out sound, drafts and smoke - without compromising on appearance, of course. Our four-sided universal sealing system for sliding doors meets these requirements. As the system is versatile and suitable for all common hardware systems, it also reduces planning and installation work, which in turn saves time and cost.
Advantages
- effective sealing against sound, smoke, drafts and odors
- prevents the door from rattling under the influence of suction and pressure
- door thickness independent due to mounting on the door leaf surface
- can be combined with many common sliding door fittings
- lowest opening forces due to optimally matched magnetic sealing profiles
- internal continuous function test according to DIN EN 1527, class 6 (> 200,000 cycles)
Complete sealing system for wooden sliding doors running in the wall
The athmer Rundumdicht VHH-Set
The perfect four-sided sealing system for wooden sliding doors running in the wall with wall pocket and running in front of the wall with track box and inlet pocket, in conjunction with a surrounding frame.
Advantages
- for single-panel sliding doors running in front of the wall with guide pocket
- increased tightness against: sound, draughts, smoke, odours
- for sliding panels up to 1,958 mm wide
- suitable sliding door fittings with M8 connection flange thread
Set Contents
- Schall-Ex® Slide M-12 WS SLA (2 pc.)
- Slide Adapter-12 (1 pc.)
- Spacer Slide 5 (1 pc.)
- athmer sliding door guide (1 pc.)
- Magnet (2 pc.)
The first sealing system for modern pivot doors.
Pivot L-15 door system
Until now swing-through pivot doors could hardly be sealed against sound, smoke and draughts, so that their range of application was limited. This is now a thing of the past: with the Pivot L-15 system, athmer presents the first four-sided sealing system for modern pivot doors.
The system consists of two automatic drop seals with a special roller actuator and two vertical magnetic sealing systems. The drop seals with roller actuator allow the door to be opened in both directions. The magnetic seal systems only tighten when they are on top of each other and the pivot door is at the zero point. Otherwise, the door leaf swings smoothly in both directions.
Advantages
- effective sealing against sound, smoke, draughts and odours
- special roller release for opening in both directions
- can be combined with many common pivot door fittings
- lowest opening forces and smooth swinging due to optimally matched magnetic sealing profiles
Not the right one for you?
Click here to go to the product finder: